Boiler house accessories

novaSEAL OV-GK safety oval seal 100 x 150 x 15 x 8 mm (clear width)
The safety seal for steam boilers and containers, material profile
The new sealing material novaSEAL OV consists of
a temperature, corrosion and
chemical-resistant high-performance fabric.
Seal key data: Operating limits 25 bar 225 °C
Surface pressure min. 5 N/mm2 max. 35 N/mm2
Recommended heating gradient max. 2 °C/min
Boiler water / media resistance TRD 611
Component designation TÜV.D.99-001.C

Weather protection grille made from galvanised sheet steel type WG dimension: 900 x 600 mm with rear-mounted bird protection grille made from galvanised wire mesh.

Weather protection grille made from galvanised sheet steel type WG dimension: 1000 x 990 mm with rear-mounted bird protection grille made from galvanised wire mesh.

Weather protection grille made from galvanised sheet steel type WG dimension: 1200 x 1200 mm with rear-mounted bird protection grille made from galvanised wire mesh

Vortex flow meter
for recording the mass flow of saturated steam, liquids, gases with integrated gas and energy calculator

One sensor for all nominal diameters, lifetime calibration ensures maximum system availability. Maintenance-free unit design leads to minimal operating costs. High vibration resistance guarantees reliable measurement.

Technical data:
Nominal diameter: DN 40
Flanged connection: PN40, flange EN1092-1 B1 (DIN2501)
Display, operation: 2-line display, push buttons, HART
output, input: 4-20 mA SIL HART + frequency

Vortex flow meter
for recording the mass flow of saturated steam, liquids, gases with integrated gas and energy calculator

One sensor for all nominal diameters, lifetime calibration ensures maximum system availability. Maintenance-free unit design leads to minimal operating costs. High vibration resistance guarantees reliable measurement.

Technical data:
Nominal diameter: DN 50
Flanged connection: PN40, flange EN1092-1 B1 (DIN2501)
Display, operation: 2-line display, push buttons, HART
output, input: 4-20 mA SIL HART + frequency

Vortex flow meter
for recording the mass flow of saturated steam, liquids, gases with integrated gas and energy calculator

One sensor for all nominal diameters, lifetime calibration ensures maximum system availability. Maintenance-free unit design leads to minimal operating costs. High vibration resistance guarantees reliable measurement.

Technical data:
Nominal diameter: DN 80
Flanged connection: PN40, flange EN1092-1 B1 (DIN2501)
Display, operation: 2-line display, push buttons, HART
output, input: 4-20 mA SIL HART + frequency

Vortex flow meter
for recording the mass flow of saturated steam, liquids, gases with integrated gas and energy calculator

One sensor for all nominal diameters, lifetime calibration ensures maximum system availability. Maintenance-free unit design leads to minimal operating costs. High vibration resistance guarantees reliable measurement.

Technical data:
Nominal diameter: DN 100
Flanged connection: PN40, flange EN1092-1 B1 (DIN2501)
Display, operation: 2-line display, push buttons, HART
output, input: 4-20 mA SIL HART + frequency

Vortex flow meter
for recording the mass flow of saturated steam, liquids, gases with integrated gas and energy calculator

One sensor for all nominal diameters, lifetime calibration ensures maximum system availability. Maintenance-free unit design leads to minimal operating costs. High vibration resistance guarantees reliable measurement.

Technical data:
Nominal diameter: DN 150
Flanged connection: PN40, flange EN1092-1 B1 (DIN2501)
Display, operation: 2-line display, push buttons, HART
output, input: 4-20 mA SIL HART + frequency

Vortex flow meter
for recording the mass flow of saturated steam, liquids, gases with integrated gas and energy calculator

One sensor for all nominal diameters, lifetime calibration ensures maximum system availability. Maintenance-free unit design leads to minimal operating costs. High vibration resistance guarantees reliable measurement.

Technical data:
Nominal diameter: DN 200
Flanged connection: PN40, flange EN1092-1 B1 (DIN2501)
Display, operation: 2-line display, push buttons, HART
output, input: 4-20 mA SIL HART + frequency

The Afriso oil-water detector can be used in conjunction with 1 to 5 optoelectronic probes to detect oils such as heating oil, diesel fuel, low-viscosity group AIII lubricating oils, engine oils, gear oils, hydraulic oil, vegetable oil, transformer oils and water.

The OM5 is an indicator with built-in operating lamp, alarm lamp, switchable buzzer and output relay. The optoelectronic probes are mounted on the points that are to be monitored. The oil detector is designed for wall mounting in dry rooms. With mounting frame, installation is possible in a switch cabinet or control panel.

Note:

The optoelectronic probes are not included in the scope of delivery.


Properties:
Output: 1 potential-free switching contact
General building authority approval: Z-65.40-214

Technical data:

Voltage: 230 V ~
Current intensity: 2 A
Protection class: IP 30
Dimensions H x W x D: 163 x 79 x 62 mm

The Afriso optoelectronic probe is used to detect liquids in conjunction with the OM5 oil detector and the WM5 water detector. - Diameter 10 mm - response height 5 mm - cable length 10 m

Leak indicator visual display unit LAS 230
up to max. 232 l monitoring area
Diameter 210 x 730 mm

Leak indicator visual display unit LAS 72
up to max. 72 l monitoring area
Diameter 160 x 440 mm

Leak indicator visual display unit LAS 39
up to max. 39 l monitoring area
Diameter 160 x 310 mm

Weather protection grille made from galvanised sheet steel type WG dimension: 800 x 800 mm with rear-mounted bird protection grille made from galvanised wire mesh

Weather protection grille made from galvanised sheet steel type WG dimension: 500 x 500 mm with rear-mounted bird protection grille made from galvanised wire mesh

novaSEAL OV-GK safety oval seal 150 x 200 x 15 x 8 mm (clear width)
The safety seal for steam boilers and containers, material profile
The new sealing material novaSEAL OV consists of
a temperature, corrosion and
chemical-resistant high-performance fabric.
Seal specifications: Operating limits 25 bar 225 °C
Surface pressure min. 5 N/mm2 max. 35 N/mm2
Recommended heating gradient max. 2 °C/min
Boiler water / media resistance TRD 611
Component designation TÜV.D.99-001.C

novaSEAL OV-GK safety oval seal 220 x 320 x 25 x 10 mm (clear width)
The safety seal for steam boilers and containers, material profile
The new sealing material novaSEAL OV consists of
a temperature, corrosion and
chemical-resistant high-performance fabric.
Seal specifications: Operating limits 25 bar 225 °C
Surface pressure min. 5 N/mm2 max. 35 N/mm2
Recommended heating gradient max. 2 °C/min
Boiler water / media resistance TRD 611
Component designation TÜV.D.99-001.C

novaSEAL OV-GK safety oval seal 320 x 420 x 25 x 10 mm (clear width)
The safety seal for steam boilers and containers, material profile
The new sealing material novaSEAL OV consists of
a temperature, corrosion and
chemical-resistant high-performance fabric.
Seal specifications: Operating limits 25 bar 225 °C
Surface pressure min. 5 N/mm2 max. 35 N/mm2
Recommended heating gradient max. 2 °C/min
Boiler water / media resistance TRD 611
Component designation TÜV.D.99-001.C

ISOKERAM rubber rings reinforced with chrome steel wire (516082) graphite coating on the outside with 8 holes, A=20 mm, bolt circle 550 mm, 495 x 600 x 10 mm thick, round

With ISOKERAM / ISOTHERM 800 rubber strip reinforced with chrome steel wire 516082 20 x 15 mm, graphite coated

Sticker "Boiler room unauthorised persons..." Colour: black on yellow, dimensions: 300 x 200

Sticker "Hot surface" according to BGV A8, ASR A1.3, DIN 4844

Escape sign, photo-luminescent according to DIN 67510 "Emergency exit", material: film, self-adhesive H x W: 150 mm x 300 mm

Boiler system logbook TRD 601 - 604

Insulating mat ring blanket fireproof 1200/96-38 BioRing AD: 495 mm, ID= 80 mm, thickness= 38 mm

Insulating ring Ceraboard fireproof, 100-1260/RG310kg/cbm AD = 495 mm, ID = 80 mm, thickness = 40 mm

Shaped refractory brick with centre hole, dimension: diameter 490 mm x 200 mm high 35 mm offset, upper diameter 450 mm bolt circle: top diameter 80 mm, bottom diameter 150 mm RG2,2 kr/dm³, incl. 2 pcs. handle in material no. 1.4845, weight approx. 78 kg

Insulating panel for sealing on flue gas side 13 x 1000 x 1200 mm